Reasons that Make Solid Surface Countertops a Practical Choice for Homes and Businesses

15 December 2020

We want a ledge that will draw out the best of our kitchen, and it’s hard to not be taken in by the beauty of the natural stone. In any case, grins go to glares when we discover that maintaining natural stone requires more responsibility than we’re willing to place in. For a few, the extra care and attention required can truly cramp their way of life, and if that wasn’t sufficiently bad, the natural stone just isn’t cheap. Fortunately, there’s an ace card that bustling mortgage holders can play – solid surface countertops.

Solid Surfaces?

A solid surface is an engineered material made from a composite of polymers. Durable and less expensive than natural stone, the material consolidates the best material properties required for a kitchen climate. To add tone to plans to the material, bauxite, minerals and colours utilized. On the off chance that this is progressed admirably, the subsequent items are nearly indistinguishable from the natural material it’s attempting to emulate.

Solid Surface Countertops – A Fuss-Free and Practical Choice.

Solid surfaces are reasonably designed to meet the most well-known requirements in the kitchen. And in the kitchen where you prepare food consistently, a ledge should be easy to clean and sterile – and solid surfaces are all that and more. So what makes solid surfaces so easy to maintain?

Stains Be Gone!

Solid surface countertops are non-permeable and therefore totally impermeable to staining (YES!). Spills and other untidy mishaps will, in general, happen now and then in the kitchen, so it’s acceptable to realize that your ledge won’t soak up oil, food colours or any other stain – as long as the surface isn’t scratched or damaged.

Requires Little Maintenance. What’s Sealing?

With solid surfaces, you’ll never have to realize what resealing is. However, we’ll let you know anyway – sealing is the way toward applying a defensive coating (typically a special polymer) that fills the pores and gaps of surface material. For naturally permeable materials (for example natural stone) sealing is necessary for the event that you want to fend stains off. It will also require periodical resealing to maintain its defensive coat.

Easy Repairs – Hey, Presto!

Because solid surface countertops are made of the same homogeneous material completely, sanding down its surface won’t reveal any irregularities that may lie beneath. The consistency in tone and configuration will also make matching a replacement part with the original piece a lot easier, and the joining at the seams near undetectable.

Hard Knocks? Don’t worry about it!

Dissimilar to a hard stone which is unbending and fragile, solid surfaces are adaptable and therefore have better flexural strength. At the same thickness, the delicate, elastic polymer composite will absorb stuns and thumps in a way that is better than a hard material without cracking or chipping. This will eliminate any stresses you may have over accidentally dropping something heavy onto it, or if your less informed brother by marriage chooses to climb onto it to reach that bag of chips you were attempting to keep stowed away from him.

Effortless Hygiene

A non-permeable material means that solid surfaces are a lot easier to clean. More often than not, wet material and some soapy water will get the job done. In any case, more importantly, a non-permeable material won’t snag dangerous bacteria which can be a real health concern. There’s a reason why solid surfaces are popular with hospitals.

 

Optimized by: Netwizard SEO